Corgi Aviation Archive Collector Series AA27706
North American P-51D Mustang Diecast Model
USAAF 20th FG, 79th FS, #44-13761 Happy Jack's Go Buggy, Jack Ifrey, RAF Kings Cliffe, England, August 1944 | |
| 1:72 Scale | | Length | | Width |
|---|
| North American P-51D Mustang | | 5.25" | | 6.25" |
With ace pilot Jack Ilfrey having been shot down over France just six days after D-Day, but luckily managing to avoid capture thanks to the efforts of the French resistance network, he soon found himself in London being interrogated by Allied intelligence officers. It was highly unusual to allow a downed airman to resume combat operations in the same theatre of operations following a successful repatriation, as they were at risk of both placing his helpers in danger and being shot as a spy if brought down again. Despite this, after a short spell touring USAAF airfields to recount his experiences to fellow pilots, Ilfrey found himself back at Kings Cliffe airfield, the commanding officer of his old squadron. The unit had recently traded their twin engined P-38 Lightnings for North American P-51D Mustangs, with the P-38s transferring to the Nineth Air Force for use in ground support operations.
With his Mustang receiving the same "Happy Jack's Go Buggy" nose artwork as his previous fighter, Ilfrey would not score any further victories flying the Mustang, but he would use it as an unlikely wartime flying taxi. On the way home from completing an escort mission to Berlin, Ilfrey's wingman was hit by flak and forced to make a hasty landing at an abandoned airstrip in Holland. Unwilling to leave the young airman to an uncertain fate, Ilfrey landed his "Go Buggy" at the same airfield, beckoned his wingman into the cockpit and took off again sat on his lap - he described this as an extremely uncomfortable, but memorable flight back to Kings Cliffe for the pair.
Please note: Corgi chose to produce this model with a single drop-tank, permanently installed under the left wing. There is no provision for removing the drop tank from the left wing, or installing a second tank under the right wing.
Designed to meet an RAF requirement for fighter-bomber and reconnaissance aircraft, the P-51 Mustang was first flown on October 26th, 1940. This versatile aircraft was capable of escorting bombers on long-range missions, engaging in dogfights, and dropping down to destroy German targets on the ground. At least eight versions of the P-51 were produced, but it was the definitive P-51D that gave the Mustang its classic warbird appearance. Britain and the US both tested the airframe with the Rolls-Royce Merlin engine, which gave the aircraft tremendous performance gains. The Truman Senate War Investigating Committee called the Mustang "the most aerodynamically perfect pursuit plane in existence." © Copyright 2003-2024 The Flying Mule, Inc.
Corgi's 1:72 scale P-51 Mustang series includes the early war P-51B and the late war P-51D variants. P-51B releases feature either an early bird-cage style canopy or the "Malcolm-Hood" style canopy and under wing mounted pitot tube. The P-51D's large "bubble-top" canopy allows for easy viewing of a hand-painted pilot figure. A removable engine cowling is included on some releases (see photos), revealing a detailed Rolls-Royce Merlin engine. This series includes models with a variety of wing mount drop tanks and ordnance and accurately modeled radiator scoops. When configured for ground display, the wing's structural detail can be seen inside the wheel wells.
© Copyright 2003-2024 The Flying Mule, Inc.
The Corgi "Aviation Archive" range presents highly-detailed, ready-made diecast models of military and civilian aircraft. The vast Aviation Archive range has become the standard by which all other diecast airplane ranges are judged. Each Corgi model is based on a specific aircraft from an important historical or modern era of flight, and has been authentically detailed from original documents and archival library material. Famous airplanes and aviators from both military and commercial airline aviation are all honored.
Corgi "Aviation Archive" diecast airplanes feature:
- Diecast metal construction with some plastic components.
- Realistic panel lines, antennas, access panels and surface details.
- Pad printed markings and placards that won't fade or peel like decals.
- Interchangeable extended/retracted landing gear with rotating wheels.
- Poseable presention stand to display the aircraft "in flight".
- Many limited editions with numbered certificate of authenticity.
- Detailed, hand-painted pilot and crew member figures.
- Authentic detachable ordnance loads complete with placards.
- Selected interchangeable features such as speed-brakes, opened canopies and access panels.
- Selected moving parts such as gun turrets, control surfaces and swing-wings.
© Copyright 2003-2024 The Flying Mule, Inc.
