AF-X XP10001
North American X-15A Display Model
NASA/USAF, #56-6672 Little Joe The II, Edwards AFB, CA | |
| 1:67 Scale | | Length | | Width |
|---|
| North American X-15A | | 9" | | 4" |
This model represents the third of three prototype aircraft that were produced for the X-15 flight test program. The North American X-15 rocket-powered aircraft/spaceplane was part of the X-series of experimental aircraft, initiated with the Bell X-1, that were made for the USAAF/ USAF, NACA/NASA, and the USN. The X-15 set speed and altitude records in the early 1960s, reaching the edge of outer space and returning with valuable data used in aircraft and spacecraft design. As of 2011, it holds the official world record for the fastest speed ever reached by a manned rocket-powered aircraft.
Please note: Although the box for this model identifies it as 1:72 scale, the actual model dimensions are larger and much closer to 1:67 scale.
Designed as a hypersonic research aircraft for the X-Series of USAF/USN sponsored experimental aircraft, the X-15 was first flown on June 8th, 1959 (Unpowered) and September 17th, 1959 (Powered). The X-15 was not capable of conventional take-off, instead being dropped from a B-52 at altitude prior to firing its rocket engines. Three X-15s were built, completing a total of 199 flights between them, setting many altitude and speed records along the way. The highest flight took place on August 22nd, 1963 reaching an altitude of 67 miles, while the fastest flight was on October 3rd, 1967 reaching 4,519mph. © Copyright 2003-2025 The Flying Mule, Inc.
The AF-X range presents affordable, ready-made resin models of experimental aircraft in 1:72 scale.
AF-X display airplanes feature:
- Molded resin construction with no assembly required.
- Realistic panel lines, antennas, access panels and surface details.
- Pad printed markings and placards that won't fade or peel like decals.
- Presentation stand to display the aircraft "in flight".
Why Resin?
It's very expensive to produce die-casting molds, and manufacturers must sell a large number of models from each mold in order to recoup development costs. Some subjects are so obscure that it's difficult to sell large quantities of them. Resin-casting is a much simpler and less expensive process, and manufacturers can use it to make limited runs of models that can't be cost effectively manufactured in diecast metal. With resin-cast models, collectors can add fascinating and unusual subjects to their collections without the time and difficulty of assembling and painting a model kit.
© Copyright 2003-2025 The Flying Mule, Inc.
