Corgi Aviation Archive Collector Series AA34205
Boeing CH-47C Chinook Diecast Model
RAAF No.12 Sqn | Limited Edition
1700
Pieces Worldwide |
|
| 1:72 Scale | | Length | | Width |
|---|
| Boeing CH-47C Chinook | | 16.5" | | 10" |
Chinooks have supported the U.S.Army based in Germany since 1969, the type gaining the nick-name 'Big Windy' due to the wind stirred up huge rotors. The CH-47C is outwardly similar to the earlier CH-47A and 'B models, but is powered by two 3750 shp T55-L-11C engines and is capable of lifting a load very nearly equal to the -A model's gross weight. The Army acquired a total of 270 Boeing-built CH-47Cs, plus in 1985,a further eleven built byAgusta in Italy, which were originally built for Iran. The Chinook remains in service today with the U.S.Army in large numbers, as well as with the air arms of many overseas countries, including Australia, whose Air Force took delivery of twelve in 1975 for operation by No.12 Squadron based at Amberley, Queensland, in support of the Army. A15-007 is one of these and is depicted in the RAAF's current camouflage scheme.
Designed as a turbine-powered replacement for the CH-37 Mojave, the CH-47 was first flown on September 21st, 1961. This iconic helicopter has had a long service history, seeing action in many different wars, from Vietnam to Afghanistan. The Chinook is the U.S. Army's heaviest-lifting helicopter, primarily serving as a troop transporter, with secondary roles including artillery emplacement and battlefield resupply. It has a crew of three and can move 55 combat-ready troops. Its wide-loading ramp can be opened in-flight for paratroopers, and three cargo hooks can extend through a floor hatch, which allows the Chinook to be used as a flying crane. © Copyright 2003-2024 The Flying Mule, Inc.
Corgi's 1:72 scale Chinooks are some of the most sought after models in 1:72 scale. The most notable feature of this model is the rotor blades, which are geared to turn in opposite directions. Two sets of rotor blades are included, one with dropping blades for ground display and another with blades that are curved upwards for in-flight display. The model has steerable front wheels and a large nose canopy, which allows for easy viewing of the cockpit interior and crew figures. The rear cargo ramp is accurately articulated and easy to configure, and when fully opened reveals a large cargo bay. A variety of delicate antennas as well as air inlets on the rear nacelles are featured in each release.
© Copyright 2003-2013 The Flying Mule, Inc.
The Corgi "Aviation Archive" range presents highly-detailed, ready-made diecast models of military and civilian aircraft. The vast Aviation Archive range has become the standard by which all other diecast airplane ranges are judged. Each Corgi model is based on a specific aircraft from an important historical or modern era of flight, and has been authentically detailed from original documents and archival library material. Famous airplanes and aviators from both military and commercial airline aviation are all honored.
Corgi "Aviation Archive" diecast airplanes feature:
- Diecast metal construction with some plastic components.
- Realistic panel lines, antennas, access panels and surface details.
- Pad printed markings and placards that won't fade or peel like decals.
- Interchangeable extended/retracted landing gear with rotating wheels.
- Poseable presention stand to display the aircraft "in flight".
- Many limited editions with numbered certificate of authenticity.
- Detailed, hand-painted pilot and crew member figures.
- Authentic detachable ordnance loads complete with placards.
- Selected interchangeable features such as speed-brakes, opened canopies and access panels.
- Selected moving parts such as gun turrets, control surfaces and swing-wings.
© Copyright 2003-2024 The Flying Mule, Inc.
