Corgi Aviation Archive Collector Series AA32520 Junkers Ju 87B Stuka Diecast Model Luftwaffe, S2+LM, St. Lawrence, England, Battle of Britain, August 1940 | Limited Edition 912 Pieces Worldwide |
|
1:72 Scale | | Length | | Width |
---|
Junkers Ju 87B Stuka | | 6.25" | | 7.5" |
PLEASE NOTE: This item is not currently in stock and has a planned arrival date of December 2025.- Orders may not ship until complete. If you wish to receive in-stock items prior to pre-ordered items, you must place separate orders.
- Arrival dates are subject to change. Consider them to be estimates as manufacturers frequently revise them.
- Credit Cards are not billed until time of shipment. PayPal payment (not recommended) is required at time of order.
During the late afternoon of 8th August 1940, more than 80 Ju87 Stukas and their fighter protection left their bases in Northern France to make one final attack of the day against the British Convoy CW9 'Peewit' off the south coast of the Isle of Wight. The area had been attacked mercilessly by German naval and air forces since the early hours. Each Luftwaffe raid was met by strong opposition from the Royal Air Force, and this third raid was no exception. As Ju87 Stuka S2+LM was about to launch its diving attack, it suffered engine failure, causing the aircraft to immediately lose height. At the same time, a Hawker Hurricane from No.145 Squadron attacked the aircraft, with a short, well-aimed burst from the fighter, killing the rear gunner and severing fuel lines, ensuring the pilot had to immediately look for a suitable place to set the stricken aircraft down. Landing in a field at St Lawrence, just inland from the sea, the aircraft came to rest in a wooded area, but remained relatively intact, incredibly, with its full complement of bombs still in place. Significant as one of the Stukas which took part in the devastating raids against Convoy CW9 'Peewit' in the English Channel, this particular aircraft was also the first intact Stuka to fall into British hands, and was immediately prepared for transportation to the mainland for evaluation. Designed to function as a close support aircraft, the Ju 87 was first flown on September 17th, 1935. The Ju 87 had an innovative design that included automatic dive brakes under each wing-a feature that protected against the consequences of pilot blackout by ensuring recovery from an attack dive. Crewed by a pilot and rear gunner, the Ju 87 had twin 37mm cannons and a bomb that swung away from the propeller on an elongated U-shaped crutch. Its inverted gull wings improved pilot-to-ground visibility, gave the undercarriage a shorter height and made the Ju 87 instantly recognizable to its enemies. © Copyright 2003-2025 The Flying Mule, Inc. Corgi's 1:72 scale Stukas faithfully replicate the gull-wing or "cranked" wing pattern, which with the spatted main gear was one of the most notable and unusual features of this aircraft. Delicately assembled dive-brakes can be seen be seen beneath each wing. A 250kg bomb is mounted to the U-shaped crutch below the fuselage. The top engine cover can be removed to reveal the inverted Junkers Jumo 211D engine with the correct main engine support frames. Additional features include all-metal braced elevators, engine radiator detail, slotted ailerons and flaps and a rearward-facing machine gunner manning the M15 machine gun. © Copyright 2003-2025 The Flying Mule, Inc. The Corgi "Aviation Archive" range presents highly-detailed, ready-made diecast models of military and civilian aircraft. The vast Aviation Archive range has become the standard by which all other diecast airplane ranges are judged. Each Corgi model is based on a specific aircraft from an important historical or modern era of flight, and has been authentically detailed from original documents and archival library material. Famous airplanes and aviators from both military and commercial airline aviation are all honored. Corgi "Aviation Archive" diecast airplanes feature: - Diecast metal construction with some plastic components.
- Realistic panel lines, antennas, access panels and surface details.
- Pad printed markings and placards that won't fade or peel like decals.
- Interchangeable extended/retracted landing gear with rotating wheels.
- Poseable presention stand to display the aircraft "in flight".
- Many limited editions with numbered certificate of authenticity.
- Detailed, hand-painted pilot and crew member figures.
- Authentic detachable ordnance loads complete with placards.
- Selected interchangeable features such as speed-brakes, opened canopies and access panels.
- Selected moving parts such as gun turrets, control surfaces and swing-wings.
© Copyright 2003-2025 The Flying Mule, Inc. |