Corgi Aviation Archive Collector Series AA36508
Hawker Typhoon Mk I Diecast Model
RCAF No.439 Sqn, R. A. Johns, Normandy, France, July 1944 | Limited Edition
1400
Pieces Worldwide |
|
| 1:72 Scale | | Length | | Width |
|---|
| Hawker Typhoon Mk I | | 5.25" | | 7" |
Following the success of the Hawker Hurricane as a fighter-bomber, it was logical that its successor the Typhoon should be considered for the same role and the first Typhoon fighter-bomber squadron was formed in late 1942. Armed with 500lb and, later, 1000lb bombs, these aircraft were quickly dubbed 'bomphoons' by the press. As part of 2nd TAF, the all-Canadian 143 Wing played a vital role throughout the Normandy invasion and were at the forefront of hazardous low-level dive-bombing operations with these aircraft. While the rocket-firing Typhoons attacked road convoys and troop concentrations, the 'bomphoons' were usually tasked with targets such as radar installations, strongpoints, road junctions and bridges. The model represents a typical aircraft of 439 Squadron, 143 Wing as it would have appeared during attacks on the Orne River bridges near Caen in July 1944.
Designed by Sydney Camm for the British Air Ministry, the Typhoon was first flown on February 24th, 1940. The large under-fuselage chin radiator gave the Typhoon a menacing look, and was its most notable identifying physical feature. Powered by a Napier Sabre 24 cylinder engine-which gave it a top speed in excess of 400 mph-and fitted with air-to-ground rockets and two underwing bombs, it made an exceptional fighter-bomber hybrid. The Typhoon could engage ground targets and still hold its own against German bombers and fighters. It proved especially adept at engaging marauding Fw-190 on the British coast. © Copyright 2003-2024 The Flying Mule, Inc.
Corgi's 1:72 scale Typhoons feature a prominent pair of 20mm cannon barrels on the leading edge of each wing, vents for spent cannon shells and separately applied transparent landing lights. The characteristic radiator chin duct of this mid-war Mk 1b fighter-bomber is expertly modeled, with details of the radiator clearly visible through the large opening. The landing gear is easy to configure for ground display (most releases), with details of the wings' construction visible inside the wheel wells, and the large canopy provides a clear view of a detailed pilot figure. Ground attack releases also include a variety of weapons loads.
© Copyright 2003-2013 The Flying Mule, Inc.
The Corgi "Aviation Archive" range presents highly-detailed, ready-made diecast models of military and civilian aircraft. The vast Aviation Archive range has become the standard by which all other diecast airplane ranges are judged. Each Corgi model is based on a specific aircraft from an important historical or modern era of flight, and has been authentically detailed from original documents and archival library material. Famous airplanes and aviators from both military and commercial airline aviation are all honored.
Corgi "Aviation Archive" diecast airplanes feature:
- Diecast metal construction with some plastic components.
- Realistic panel lines, antennas, access panels and surface details.
- Pad printed markings and placards that won't fade or peel like decals.
- Interchangeable extended/retracted landing gear with rotating wheels.
- Poseable presention stand to display the aircraft "in flight".
- Many limited editions with numbered certificate of authenticity.
- Detailed, hand-painted pilot and crew member figures.
- Authentic detachable ordnance loads complete with placards.
- Selected interchangeable features such as speed-brakes, opened canopies and access panels.
- Selected moving parts such as gun turrets, control surfaces and swing-wings.
© Copyright 2003-2024 The Flying Mule, Inc.
