Hobby Master 1:72 Air Power Series HA1912 McDonnell Douglas F-4C Phantom II Diecast Model USAF 8th TFW, 433rd TFS, "Scat XXVII", Robin Olds, Ubon RTAFB, Thailand, 1969 |
1:72 Scale | | Length | | Width |
---|
McDonnell Douglas F-4C Phantom II | | 10.5" | | 6.25" |
Robin Olds (July 14, 1922 – June 14, 2007) was an American fighter pilot and general officer in the U.S. Air Force. He was a "triple ace", with a combined total of 16 victories in World War II and the Vietnam War. He retired in 1973 as a brigadier general. His 259 total combat missions included 107 in World War II and 152 in Southeast Asia, 105 of those over North Vietnam. Scat XXVII was retired from operational service and placed on display at the National Museum of the United States Air Force, Wright-Patterson Air Force Base, Ohio.
The McDonnell Douglas F-4 Phantom II is a two-seat, twin-engined, all-weather, long-range supersonic interceptor fighter/fighter-bomber originally developed for the U.S. Navy by McDonnell Aircraft. Proving highly adaptable, it became a major part of the air wings of the U.S. Navy, U.S. Marine Corps, and U.S. Air Force. It was used extensively by all three of these services during the Vietnam War, serving as the principal air superiority fighter for both the Navy and Air Force, as well as being important in the ground-attack and reconnaissance roles by the close of U.S. involvement in the war.
First entering service in 1960, the Phantom continued to form a major part of U.S. military air power throughout the 1970s and 1980s, being gradually replaced by more modern aircraft such as the F-15 Eagle and F-16 Fighting Falcon in the U.S. Air Force; the F-14 Tomcat and F/A-18 Hornet in the U.S. Navy; and the F/A-18 in the U.S. Marine Corps. It remained in use by the U.S. in the reconnaissance and Wild Weasel roles in the 1991 Gulf War, finally leaving service in 1996. The Phantom was also operated by the armed forces of 11 other nations. Israeli Phantoms saw extensive combat in several Arab–Israeli conflicts, while Iran used its large fleet of Phantoms in the Iran–Iraq War. Phantoms remain in front line service with seven countries, and in use as an unmanned target in the U.S. Air Force. Phantom production ran from 1958 to 1981, with a total of 5,195 built. This extensive run makes it the second most-produced Western jet fighter, behind the F-86 Sabre at just under 10,000 examples.
Designed as a fleet defense fighter for the US Navy, the F-4 Phantom was first flown on May 27, 1958. This twin-engine, long-range all-weather fighter/bomber proved highly adaptable and served in the Marine Corps and the US Air Force as well as in the Navy. During the Vietnam War, it was the principal air superiority fighter for the Navy and the Air Force and was also used for reconnaissance and ground attack. The Phantom continued to serve well into the 1970s and 1980s and even flew missions during the first Gulf War. Finally phased out by the F-14, F-16 and F/A-18, the Phantom was retired in 1996. © Copyright 2003-2024 The Flying Mule, Inc.
Hobby Master's 1:72 scale F-4 Phantom II is highly detailed and very popular among collectors. This model has an intricately crafted fuselage, with rear and forward canopies that open to expose cockpit interior details such as instrument panel dials, control stick and ejector seat handles. The solid metal wing has raised wing-tips and a dog-toothed leading edge that blends seamlessly into the fuselage. Each release includes a full complement of removable ordnance. Variants in this series have notable differences in the nose and/or tail fin and slight variations in the engines' exhaust. Carrier-based variants have elevators with a raised leading edge, and land-based variants have standard leading edges.
© Copyright 2003-2013 The Flying Mule, Inc.
The Hobby Master "1:72 Air Power Series" range presents detailed, ready-made diecast models of military aircraft.
Hobby Master "1:72 Air Power Series" diecast airplanes feature:
- Diecast metal construction with some plastic components.
- Realistic panel lines, antennas, access panels and surface details.
- Pad printed markings and placards that won't fade or peel like decals.
- Opening canopies, revealing detailed cockpit interiors.
- Interchangeable extended/retracted landing gear.
- Presentation stand to display the aircraft "in flight".
- Authentic detachable ordnance loads complete with placards.
- Accurately detailed underside with concealed screwheads.
© Copyright 2003-2024 The Flying Mule, Inc.